Material Handling & Feeding

Material Handling & Feeding
Display:
Sort by:
ImageNameUMQuantity
42" Diameter Mid West Vibratory Feeder Bowl
23953

Specifications:

  • 42" Diameter
  • Stainless Steel
  • Complete with Adjustable Stand
  • Tooled for Headed Products
Each
24" Vibratory F.S.I. Bowl
23808

Specifications:

  • 24" Diameter
  • Hang From the Head Tooling
  • 1/2" Diameter Last used
Each
18" Vibratory F.S.I. Bowl
22729

Specifications:

  • 18"
  • For Headless STUD Feeding
Each
18" Vibratory Mid West Bowl
24017

Specifications:

  • 18" for Headless STUD Feeding
  • Tube Feed
  • Stainless Steel
Each
1" RMG Model 1216-02 Uncoiler Pre-Straightener
25930

Catalog Specifications:

  • Maximum Wire Diameter:
    • 3/4"(Alloy)
    • 1"(Mild)
  • Maximum Coil Weight: 4K Lbs.
  • Speed: 30 FPM

Equipped with:

  • Pre-Straightener
  • 6' Arm
Each
1-1/2" FE PF-6000-12 Decoiler
25932

Catalog Specifications:

  • Coil Weight: 6,000 Lbs
  • Feed Roll Forge: 4200 Lbs
  • Feed Roll Dia.: 12"
  • Feed Roll Height: 60"
  • Pre-Feed: 23 FPM
Each
1-1/2" FE PF-6000-30 Pre-feeder
25941

Catalog Specifications:

  • Wire Diameter Range: 5/8" - 1-1/2"
  • Coil Weight 6K Lbs
  • Feed Roll Force 3000 Lbs.
  • Feed Roll Dia 29"
  • Feed Roll Height 60"
  • Pre-Feed 23 FPM
Each
1-1/2" RMG 2428-02 Uncoiler
25938

Catalog Specifications:

  • Wire Diameter Range: 1/16  to 1-1/2"
  •  70" Arm
Each
1-1/8" DTI Power Rod Uncoiler Model LDF-890
25820

Includes:

  • Capacity Range: 0.625" (16mm) to 1.125" (28.5mm)
  • One set of V-Grooved, tool steel, 8" Diameter, feed rolls.
  • Dual coil support mandrels
  • Heavy duty I beam construction
  • 6000 lbs. Coil Capacity (with an un-banded length of up to 108 inches)
  • 5 HP Variable Frequency Drive with TEFC Motor
  • Speed Range from 4.5 to 120 FPM
  • 108" Long Mandrel
  • Roll type, close couple, straightener
  • Power supply disconnect switch, through the door type
  • PLC controlled electrical circuit with 24 VDC Push-Button control
  • Remote, portable, operators control station with separate release Push-buttons for feed head and straightener
  • Snag detector switch
  • End of coil detector switch
  • 480/3/60 primary voltage operation
Each
Hytrol Conveyor, 24" W x 132" L
25933

Specifications:

  • 24" W x 132" L
Each
Hytrol Rubber Conveyor 18" W x 70" Long
25943

Specifications:

  • 18" Wide  x 70" Long
Each
Hytrol Rubber Conveyor 26" x 132"
25936
  • 26" Wide x 132" Long
Each
1-1/2” RMG 2024-02 Power Driven Horizontal Uncoiler
26071

Catalog Specifications:

  • Wire Diameter Range [Mild]: 0.63” to 1.5”
  • Wire Diameter Range [Alloy]: 0.63” to 1.0”
  • Maximum Coil Weight: 6,000 Lbs.
  • Coil Feed Force: 4,000 Lbs.
  • Coil Support Roller: Approx. 72”
  • Feed Roll Diameter: 12”
  • Prefeed Speed: 30 FPM
  • Weight: 7,200 Lbs.

Equipped with:

  • Adjustable Speed Motor: 5HP
Each
1-1/4” Fastener Engineers PF-4000-08 Pre-Feed Uncoiler
26070

Catalog Specifications:

  • Mandrel Length: 59”
  • Feed Roll Diameter: 8”
  • Wire/Rod Diameter Range: 5/8” to 1-1/4”
  • Coil Capacity: 4,000 Lbs.
  • Pre-Feed Speed: 29 FPM

Equipped with:

  • Mounted Controls
Each
1-1/8” Fastener Engineers PF-6000-08 Pre-Feed Uncoiler
26072

Catalog Specifications:

  • Mandrel Length: 62”
  • Feed Roll Diameter: 8”
  • Wire/Rod Diameter Range: 5/8” to 1-1/8”
  • Coil Capacity: 6,000 Lbs.
  • Pre-Feed Speed: 23 FPM
  • Max. Speed Free Wheeling: 70 FPM

Equipped with:

  • Mounted Controls
Each
RMG Z-Flipper 96" Arms
26125

Catalog Specifications:

  • Arm Length: 96"
  • Coil Weight: 6,000 Lbs. Each Arm**

**To be confirmed

Each