Integrated machinery for fastener and wire production
Barbarotto Machinery represents Videx in North America and has worked with the line for more than 30 years. Videx systems can be supplied as stand-alone machines or combined into modular lines for threading, forming, straightening, cutting, chamfering, bending, extrusion and finishing.
Videx machine families and the parts they produce
Start with the finished part and required operations. Each card links to the corresponding equipment type, where you can review current Videx models and specifications.
Hot Forging Lines for Large Bolts & Long Fasteners
Form large-diameter bolts and long fasteners with stand-alone machines or integrated lines for heating, forging, trimming and thread rolling. Explore this equipment type
Thread & Form Rollers for High-Tensile Fasteners
Roll long, accurate threads and profiles on high-tensile or pre-hardened parts with planetary systems designed around the application. Explore this equipment type
Cold Forming Machines for Long Bolts & Special Parts
Produce headed, shouldered and extruded long parts with flexible feeding, transfer and quick-change tooling options. Explore this equipment type
Bar-End Extrusion Machines for Thread-Rolled Parts
Extrude bar ends from major diameter toward pitch diameter to prepare cold-drawn or hot-rolled material for thread rolling. Explore this equipment type
Straighten & Cut Machines for Coil-Fed Blanks
Convert drawn, hot-rolled or ribbed coil into accurate cut-to-length blanks, with chamfering and other secondary operations available. Explore this equipment type
Automatic Bent-Bolt Lines for U-Bolts & Anchor Bolts
Combine straightening, cutting, threading and bending for U-bolts, anchor bolts and other bent products made directly from coil. Explore this equipment type
Threaded-Rod Bundling Machines
Separate bulk threaded rod, count pieces and prepare consistent bundles for downstream handling and packaging. Explore this equipment type
High-Speed Threaded-Rod Production Lines
Produce ferrous or stainless threaded rod from coil with integrated straightening, cutting, rolling and handling operations. Explore this equipment type
B7 Stud Machines for High-Tensile Studs
Chamfer, stamp and thread B7 and other high-tensile studs from coil, bar or cut blanks in application-specific configurations. Explore this equipment type
Weld-Stud Lines from Wire & Rebar Coil
Straighten and cut drawn wire or rebar from coil, prepare the stud end and integrate flux-ball insertion where required. Explore this equipment type
Hydraulic & Servo Impact Cutters for Bar Blanks
Produce repeatable blanks from medium- and high-tensile bar with positive-stop control and optional chamfering or sorting. Explore this equipment type
Single & Dual Thread Rollers for Studs & Fasteners
Select single- or dual-side thread rolling for headed parts, studs and special fasteners fed from a magazine or transfer system. Explore this equipment type
Planetary Thread-Rolling Dies
Source nitrided planetary dies for Videx machines and compatible rotary thread-rolling systems from other manufacturers. Explore this equipment typeMaterial, geometry, tensile strength, diameter, length, input form, production rate and downstream operations determine the right machine or integrated line.
Plan the line around your part
Videx systems are modular. A productive discussion starts with the part and process requirements rather than a model number alone.
- Define the part: geometry, material, tensile strength, diameter and length ranges.
- Set the production target: required rate, batch size, changeover frequency and quality requirements.
- Choose the input: coil, long bar, cut blank or magazine-fed part.
- Map the operations: straighten, cut, chamfer, form, thread, bend, inspect, bundle or pack.
Frequently asked questions about Videx machinery
What types of Videx machines does Barbarotto offer?
Barbarotto works with Videx machinery for thread and form rolling, hot and cold forming, straightening and cutting, bar-end extrusion, bent-bolt production, threaded-rod production and bundling, B7 studs, weld studs, impact cutting and thread rolling dies.
Can Videx machines combine several operations in one line?
Yes. Depending on the application, Videx equipment can be supplied as an individual machine or integrated into a modular line that combines operations such as straightening, cutting, chamfering, forming, threading, bending and bundling.
Can a Videx line start from coil, bar or cut blanks?
Different Videx machine families are designed around different input forms. Some systems begin with coil, others accept long bars, cut blanks or magazine-fed parts. The correct arrangement depends on the component and production plan.
How do I choose the right Videx model?
Share the part drawing or dimensions, material, diameter and length range, desired production rate, input form and required operations with Barbarotto. The team can then help narrow the appropriate machine family and configuration.
Talk with Barbarotto about your Videx application
Ben Barbarotto supports Videx sales and applications. Send the part details and production requirements to start a focused machinery review.
Contact Barbarotto Machinery