Ref# |
Size |
Description / Specs |
22954 |
1¼'' |
Fenn #125 Impact Shear, 180 cpm, 30 Tons, 15HP |
|
|
23695 |
1¼'' |
Fenn #125 Impact Shear, 180 cpm, 30 Tons, 15HP
Needs Electricals. |
|
|
22300 |
2'' |
Ficep Model HS 90 Hydr Automatic Bar Shear, up to 60 CPM, with 20 Ft. feed table > Semi-Automatic Setup |
|
|
21846 |
2½'' |
Bulffalo Bar Shear Hydraulic Complete unit |
|
| |
23245 |
4'' |
AMD Hydrulic Bar Shear Model #1000, 1000 tons,
Recently Rebuilt |
|
| |
22753 |
7'' |
AMD Hydrulic Bar Shear Model #1000-3030, 1000 tons,
125HP
|
|
| |
Wire Straighten & Cut Off |
Ref# |
Size |
Description / Specs |
23612 |
1/8" |
Lewis 1C, 1/16" - 1/8" Wire diam, , 2" min cutoff, Stationary shear, 100 FPM, 4 ft. cutoff track, 900 lbs |
| |
| |
22999 |
1/8" |
Lewis Model 1CG, 0.062" - 0.135", 8 Speeds 35 fpm - 150 fpm, Cutoff length 2" to 6 Ft |
|
|
23949 |
1/8" |
Shuster 1v18, 38" c/o, 20-150 ppm |
| |
| |
23504 |
1/4" |
Lewis 2-c, 3/32-1/4" wire diam., 36" c/o, 100 fpm |
| |
| |
23001 |
1/4" |
Lweis 2C,13-01/2" max c/o lgth |
|
| |
23000 |
1/4 |
Lewis 2CV-4 8 Ft. Cut-off Track |
|
| |
23948 |
5/16 |
Lweix 2CV5, 6' c/o track, up to 200 ppm |
|
| |
23376 |
5/16 |
Lewis 2CV5, 36" cutoff, up to 200 fpm, Dble End Pl Roller & Bliss Press for Bending U-Bolts Sell as Complete Line |
|
| |
23829 |
3/8 |
Lewis 8F 20' cut -off, 200 fpm, 25 hp |
|
| |
23002 |
3/8 |
Lewis Model 8-C 12' max cut length, skid box tooling, electrical panel |
|
| |
23897 |
1/2" |
Lewis 9-f, 20' c/o |
| |
| |
23187 |
1/2" |
Lewis Model 9FA, 6' c/o, Vari speed with tachometer |
|
| |
23361 |
1/2 |
Lewis 9C Stationary Shear, 200 fpm, 12' Cut-off, With RMG In-Line WD and Mechanical Descaler 1980 |
| |
| |
21987 |
5/8 |
Lewis 10C, 5/16 - 5/8",75-195 FPM, approx 6' cut off,Still in production |
| |
| |
23959 |
5/8" |
Lewis 10F, Flying shear |
| |
| |
22416 |
5/8 |
Shuster Model 4-AV, Late Model, 90-180 FPM, 11/16" max c/o, 20 Ft, 100% Rebuilt 2001 with 2 new AC Speed Controllers |
| |
| |
23889 |
5/8" |
Videx VC-25-M, 39" c/o, 400 ppm Like New |
|
|
23892 |
5/8" |
Videx VC-25-MH, 5/8" wire diam., 22.75 'c/o lgth, 400 cpm, 300 fpm, Reconditioned 2005 |
|
|
23669 |
5/8" |
Videx VC-25-MS, with 20'c/o track, with servo c/o system, with B& H wire drawer at additional cost |
| |
| |
23944 |
3/4" |
Lweis Model 11F, 3/4" max wire diam., 16max c/o lgth., 75- 140 fpm, 75 hp |
| |
| |
23914 |
1" |
Lewis Model 12FHA, with 20' c/o track, up to 350 fpm |
| |
