Cold Heading
2 Die 3 Blow

23236

1/8''

Ayase Model AS-2D3P Mini Header, cutoff lnth 0.945", 0.630" UH, 250 ppm, Bushing, PKO, vari-spd

22029

22030
23929

5/32"

Nakashimada PF-420,Fingerless Trans, max c/o lgth1.0", PKO's, 200ppm

23442

1/4"

National #34, 2D3B 2-1/2" c/o lgth, 150 ppm, Bushing,

23793

1/4"

Nakashimada PF-630, Fingerless transfer, 1.57" max c/o lght., .237" max c/o diam., PKO 2nd and 3rd, 50-170 ppm, 11,000 lbs

23308

5/16"

Asahi Sunac ORH-80 High Speed, 60 mm cutoff lnth, 75 - 150 ppm, PKO, vari-drive, bushing co

23549

5/16"

Fide E-23-M8, "convertible", 8 mm co diam, 80 mm c/o lnth, 70 mm UH, 145 PPM, PKO, bushing, die relief

23334

5/16"

Asahi Okuma ORH-80, Mac Cutoff Lnth 2-3/8", 150 PPM, 60 Tons Heading, 15 HP, PKO

24005

5/16"

Fide E-23-M8, 8 mm co diam, 80 mm c/o lnth, 70 mm UH, 145 PPM, PKO, bushing, die relief, 440V

24010

3/8"

National 56, 2 Die 3 Blow, 9.5 mm x 75 mm Cutoff, 150 ppm

23792

3/8"

National 56, 2 Die 3 Blow, 9.5 mm x 75 mm Cutoff, 150 ppm, with Induction Heating, sound encl, TKO, Trim,
load monitor

23822

3/8"

National 56, 9.5 mm wire diam, 105 mm UH, 150 PPM, PKO, RKO, approx 22,000 lbs

23767

1/2"

National 56 S-1, 3" c/o lgtth., 2-1/2" UH, 150 ppm, TKO 2nd and 3rd, releif knockout, sound enclosure

23540

1/2"

Mekifasa E-23 M12, Max C/O Lnth 100 mm, 90 mm UH, 90 ppm, PKO 2nd & 3rd, Stripper in 2nd, bushing,
Sound Enclosure.

23880

1/2"

Nakashimada PF-1280S, 100 mm shank lnth, 127 mm c/o lnth, 40 - 70 PPM, 30 HP motor, PKO, 48,000 lbs

23411

9/16"

National 89 2 die 3 blow, 5" max die ko, 6" max c/o, Trim, PKO 2nd and 3rd

23193

9/16"

National 89 2D3B, Max Die KO 5", 6" Max C/O, Trim,
PKO 2nd 3rd, Very Nice

23961

9/16"

National 89 2D3B, Max Die KO 5", 6" Max C/O, Trim,
PKO 2nd 3rd, Very Nice, has Induction Heat

23607

5/8"

National Model 1012, Max 2nd die knockout 6", 75 PPM, PKO 2nd & 3rd, bushing c/o, 460V/3/60, 85,000 lbs