Videx Machinery in WIRE 2010
(Booth 15A46)

Barbarotto Machinery invites you to visit the Videx Booth in Düsseldorf, Germany
at the Wire 2010 Trade Show ---- Booth 15A46 – April 12 – 16, 2010

There will be a variety of machines on exhibit in their booth, and we are pleased to be able to offer great “show discounts” on all these demo models. 

If you have been considering new machinery for 2010, this is an opportunity to acquire new technology equipment, equipped with all the latest Videx innovations, and virtually no wait time!  All the machines will be available for delivery at the end of the show.

Please take a look below to review the upcoming Videx Exhibit, and give us a call at 1-888-988-8733 if you have any questions about the demo machines available, or any Videx machinery that you would like to consider.

Fred and Ben Barbarotto will be greeting customers in the Videx Booth from Monday, April 12 through Wednesday, April 14

We hope to see you in Düsseldorf!

Extrusion machine model VEM-15/30 for wire
Ø10-24mm with a magazine that will be demonstrated extruding the ends of pre-cut steel bars. The machine is part of a line of cold formers for small production batches with 1 to 3 stations. The machine is fed from a magazine that accepts bars in length of 70mm to 750m. The bars are pushed into the machine until reaching a positive stop. Then the grippers close on the bar and the stopper retracts. The machine heads or extrudes the part and then the grippers open and an extractor removes the parts out of the dies. The VEM models are available with 15 to 200 tons heading force and strokes up to 200mm. The machines are quick change and can be used for small production batches. Extra long bars and bent parts can be manually fed as an option.

Fully Automatic M-5 to M-12 U-Bolt machine, working from wire coil, model VAS-20-DBQ, with the new Fully Adjustable bending die. Production rates are 50-120 bent bolts per minute and 200 straight studs per minute. The VAS-20-DBQ is equipped with Hydraulic Clamping of the threading dies and a Process Control system, that also controls the cut-off length. For small series of production, the machine is optionally equipped with a hand magazine which accepts pre-chamfered and pre-extruded parts made on the other Videx machines.

Planetary Thread Roller
with a Closed Structure, Model VA-20-ES for thread rolling of Automotive quality and Hi-Tensile fasteners. The machine is equipped with Videx’s “Controlled Introduction” system, for rolling Lap-Free threads on any material hardness. Other features include Hydraulic Clamp of the thread rolling dies & Quick Set-Up features. Thread range M-6 to M-16. Production speed up to 640 PPM.

Straighten, Cut and Chamfer Machine,
Model VC-25-MSC, for wire Ø6-16mm. The length tolerance is absolute, using a positive stop, and there is no limit to the maximum length the machine can cut. The VC line is equipped with stainless steel run-off guide that requires no maintenance and no adjustment when changing from one wire size to another. Length change-over takes seconds. Complete wire change-over is done in 15-20 minutes.

Chamfer Cutting machine model VTM with an automatic magazine. The demo unit will demonstrate Videx’s chamfer machine capacity and flexibility, from simple chamfer into complex turning operations. The VTM is a Servo operated dual spindle chamfer & turn machine.