Cylindrical 2 Die

Cylindrical 2 Die

 

Display:
Sort by:
ImageNameUMQuantity
1" Tesker 35 2-Die Cylindrical Thru-Feed Only
25904

Catalog Specifications:

  • Capacity: 1"
  • Rolling Pressure: Fixed
  • Maximum Die Diameter: 6"
  • Maximum Die Face Width: 4-1/2"
  • Spindle Drive Motor: 20 HP
  • Spindle RPM Range: 80 to 375
Each
1/2" BSA In-Feed Thread Roller
25070

Catalog Specifications:

  • Max Thread Length: 6-1/4"
  • Spindle Diameter: 2-3/4"
  • Rolling Pressure: 26-36,000
Each
1/2" Kinefac MC-5-FTI 2 Die Cylindrical In-Feed / Thru-Feed Thread Roller
25135

Catalog Specifications:

  • Maximum Thread Diameter:
    • 2”  In-Feed
    • 1-1/2” Thru-Feed
  • Maximum Thread Die Length: 2-1/4”
  • Spindle Diameter: 2”
  • Adjustable Skew: 0 – 10 °

Equipped with:

  • Vibratory Feeder
Each
1-1/2" Kinefac Model MC-5-F 2 Die Thread Roller Thru-feed Only
25248

Catalog Specifications:

  • Main Motor: 20 HP
  • Hydraulics
  • 6' Feed Tables
  • 2" Spindle Diameter
  • 2-1/2" Maximum Width
Each
1-1/2" Kinefac Model MC-5-F Thru-Feed
25249

Catalog Specifications:

  • Motor Horsepower: 20 HP
  • Hydraulics
  • Spindle Diameter: 2"
  • Maximum Width: 2-1/2"

Equipped with:

  • 6' Feed Tables
Each
1-1/2" PMC PM-40 - Reconditioned
24965

2 Available

Catalog Specifications:

  • Diameter Capacity: 6 mm – 40 mm
  • Maximum Rolling Pressure: 59,000 lbs ( 27 tons )
  • Maximum Roll Width: 150 mm
  • Spindle Diameter: 54 mm
  • Spindle Tilt Range: +/- 10 degrees
Each
2" IZPE TSC-20/60 In-feed/Thru-feed
25914

Catalog Specifications:

  • Thread Diameter Range: 3 mm – 60 mm
  • Maximum length plunge feed:   160 mm
  • UNC or BSW pitch Range: 0.5 mm - 5 mm
  • Production Rate:  31 ppm
  • Maximum working pressure: 44,000 Lbs.

Equipped with:

  • Roll motor power: 7.5 HP
  • Hydraulic motor power: 3 HP
  • Cooling Motor Pump:0.25 HP
Each
2" Kinefac MC-5-F
24080
  • Maximim In-feed 2"
  • 2-1/4" Thread Die Length
  • 2" Spindle Diameter
  • 5 HP Main motor
  • Magazine Feeder
Each
2" Kinefac MC-5-F
24282
  • Maximum In-feed Diameter 2"
  • Maximum 2-1/4" Thread Die Length
  • 2" Spindle Diameter
  • 5 HP
  • Magazine Feeder
Each
2" Seny Model D-75
24799

Catalog Specifications:

  • Maximum Diameter: In-feed: 3.00 ”
    • ( 75 mm )                   
  • Maximum In-Feed Thread Die Length: 6.00"
    • ( 160 mm )
  • Spindle Diameter: 2-1/8”
    • (54 mm )
  • Spindle Speeds ( 6 speeds ):  24 – 114 rpm
Each
2" Tesker Model 215 2 Die Cylindrical Thread Roller
25742

Catalog Specifications:

  • Maximum Work Piece Diameter: 2" 
  • In Feed, Thru Feed Capabilities.
  • Max. Rolling Pressure: 32,000 lbs.
  • Motor: 15 HP Spindle Drive, 5 HP Hydraulics
  • Spindle Diameter: 2"
  • Max Roll Diameter: 6"

Equipped With:

  • Hydraulic Pump and Tank
Each
2-1/2" Izpe Model V-2E Thru-Feed
25827

Catalog Specs:

  • Diameter Range: 0.315"(8mm) - 3"(75mm)
  • Maximum Roll Diameter: 7.08" (180mm)
  • Maximum UNC or BSW Pitch: 4 T.P.I.
  • Spindle Diameter: 2-3/4"(69.85mm)
  • Spindle Speeds: 37 - 214 RPM
Each
2-1/2" Pee Wee Model P20
25379

Catalog Specifications

  • Diameter Range: 0.196” – 3”   
  • Maximum Thread Length: 7.5”  
  • Rolling Pressure: 18 Tons 
  • Spindle Diameter: 2-3/4”  
  • Spindle Speeds: 20 – 90 RPM
  • Die Diameter: 7.677”
  • Electrics: 440V/3/60
Each
3" Landis 24PW LanHyRol In-Feed Only
25906

Catalog Specifications:

  • Max. Thread Diameter: 3"
  • Max. Rolling Pressure: 18 Tons
  • Max. Thread Die Length: 7.25"
  • Spindle Diameter: 2.75"
  • Spindle Speeds: 21 - 126 rpm
  • Spindle Tile Range: ± 10 Degrees
Each
3" Landis 24PWX LanHyRol In-Feed Only
25908

Catalog Specifications:

  • Max. Thread Diameter: 3"
  • Max. Rolling Pressure: 18 Tons
  • Max. Thread Die Length: 7.25"
  • Spindle Diameter: 2.75"
  • Spindle Speeds: 21 - 126 rpm
  • Spindle Tile Range: ± 10 Degrees
Each
3" Landis 24PWX LanHyRol In-Feed Only
25909

Catalog Specifications:

  • Max. Thread Diameter: 3"
  • Max. Rolling Pressure: 18 Tons
  • Max. Thread Die Length: 7.25"
  • Spindle Diameter: 2.75"
  • Spindle Speeds: 21 - 126 rpm
  • Spindle Tile Range: ± 10 Degrees
Each
3" Seny D75 Cylindrical 2 Die - Reconditioned
25879

Catalog Specifications:

  • Rolling Pressure: 20 Tons
  • Maximum Rolling Diameter: 60 mm (3")
  • Pitch Range: 0.5 - 6 mm
  • Maximum Roll Width: 160 mm
  • Spindle Diameter: 54 mm
  • Spindle Speeds: 24 mm - 114 mm
  • Main Motor: 7.5 HP
Each
4" Bad Duben UPW25, Infeed Thread Roller
24909

Catalog Specifications:

  • Up to 4" Capacity
  • Maximum Rolling Pressure 55,000 lbs
  • Maximum In-feed Length 7"
  • Spindle Diameter 80 mm
  • Factory Rebuild 2000
Each
4" Landis 32 TFRI In-Feed Thru-feed
25905

Catalog Specifications:

  • Max. Thread Diameter: 4"
  • Max. Rolling Pressure: 70,000 Lbs.
  • Max. Roll Length: 5-3/4"
  • Spindle Diameter: 2.75"
  • Spindle Speeds: 39 - 230 ppm
  • Spindle Tile Range: ± 10 Degrees
Each
6" Bad Duben UPW 63
25400

PHOTOS NOT ACTUAL MACHINE.

Catalog Specifications:

  • Max. Rolling Pressure: 63 Tons
  • Work Diameter: 25 - 150 mm
  • Max In-feed Length: 290 mm
  • Max. Die Dia.: 300 mm

 

Each
6" Landis Hy-Duty IN-FEED / THRU-FEED
25860

Catalog Specifications:

  • In-Feed:
    6" Nominal Max. Diameter
  • Thru-Feed:
    4" Nominal Max. Diameter in Bar Lengths
  • In-Feed Thread Length: Up To 9.750”
  • Thru-Feed Thread Length: Up To 20’
  • Up To 12” Max. Diameter x 10.5” Max. Width
  • Spindle Diameter: 4.5"
  • Rolling Pressure: Up to 200,000 Lbs.
  • Spindle Tile Range: +/- 18 Degrees
Each
BAD DUBEN Model UPWS 31.5 - Reconditioned
25792

Catalog Specifications:

  • Rolling Diameter: 12 -100 mm
  • Maximum Rolling Pressure: 31.5 M Tons
  • Maximum In-feed Length 170 mm
  • Spindle Diameter 80 mm
  • Factory Rebuild 2000

Equipped with:

  • Siemens PLC
  • New Electrics
  • Central Lubrication
  • Complete Tool Kit
Each
REBUILT 4" Landis 32-TFRI 2 Die Cylindrical Thread Roller
25856

Less than 100 hours production
after rebuild.

Catalog Specs:

  • Maximum Thread Diameter" 4.00"
  • Maximum Rolling Pressure:
  • Maximum Roll Length: 5-3/4"
  • Spindle Diameter: 2.75"
  • Spindle Speeds: 39 – 230 RPM
  • Spindle Tilt Range: ± 10 Degrees
  • Main Motor: 20 HP
Each